Glue and adhesives

2-COMPONENT GLUE

Glues metal, ironfree metals, glass, stone, ceramics, wood and most kinds of rigid plastic. Limited adhesion on PE, PP, PTFE and nylon. It fills pores and imperfections, can be mixed with wood and metalgrains, sand, cement and colours. Waterproof, applicable both in- and outdoors. After curing, POXY7 can be sanded, drilled and sawn, cut and painted over using most kinds of normal paint.

2-COMPONENT EPOXY

Structural binding - 2-component-epoxy, quickdry, excellent for repairing metal. Duration: 4 - 6 min. Adhesion time: 15 min.

2-COMPONENT EPOXY

Products for metal-repairs.

2-COMPONENT EPOXY

Products for metal-repairs.

2-COMPONENT LOCTITE 3473 EPOXY

Products for metal-repairs.

2-COMPONENT EPOXY

Products for metal-repairs.

2-COMPONENT GLUE

LOCTITE 3430 is a 5-minute 2-component glue suited for areas that demand a optically clear adhesion line. Excellent for glueing glass, decorative plates and displays, as well as basic DIY-applications.

ACTIVATOR LOCTITE 7031

Loctite activators are used on passive metals, stainless or in applications that require quick curing. Loctite cleaning agent is applied to easily degrease and clean surfaces for best results.

ACTIVATOR LOCTITE 7457

ACTIVATORS AND DETERGENTS

Loctite activators are used on passive metals, stainless or in applications that require quick curing. Loctite cleaning agent is applied to easily degrease and clean surfaces for best results.

ACTIVATORS AND DETERGENTS

Loctite activators are used on passive metals, stainless or in applications that require quick curing. Loctite cleaning agent is applied to easily degrease and clean surfaces for best results.

MIXING NOZZLE 3M 48.5-50ML

MIXING NOZZLE EPX STANDARD 9742

Transportation, Consumer Goods, General Industrial, Signage, Specialty Vehicle, Construction, Electronics, Metalworking

MIX NOZZ EPX

For DP8805-8810

MIXING NOZZLE FOR MEGAPLAST ADHESIVE MM

MIXING NOZZLE POWER GRIP

CONSTRUCTION SEALANT FAÇADE

FOAM FILLER FLEXIBLE INSULATION FOAM

HEAVY FOAM PUR7

Mounting of doors, windows, panels etc in plastic, aluminum, wood and metal. Filling of walls, joints, cracks and holes, as well as sealing openings in walls, ceilings, floors, and ship-floors. Insulation of pipes. Excellent adhesion to most surfaces. UV-resistant. Heat, cold and sound isolation. Can be applied from -10°C. Can be transported down to -20°c. Can be used 360°. Hardened foam can be recoated and sanded. Good chemical resistance. Expands up to 100%, expansion stops by resistance.